Patio shade covers tones create a comfortable place to sit. Patio tones can be protected from dangerous solar rays and keep your yard furniture dry in inclement weather. There are many different options for shady courtyard covered with the temperamental stable and permanent materials such as vinyl or canvas materials. Patio tones often join up permanent structures.
Build your patio shade covers all possibilities of time in mind so that your yard is always accessible to you. Instructions build patio shade covers; a. Dig four holes at the four corners of your yard. Each hole should be 2 feet deep and 1 foot in diameter. Insert a wooden beam 11-by-2-by-4-foot in each hole. b. Put 3 inches of gravel into the holes and pour quick-drying cement. Make sure not to overfill beyond the edges of the holes. Follow the instructions that come with the cement mixing instructions. Wait 24 hours for the cement to dry. c) Use a hammer and nails to connect the 2-by-4s with four additional wood beams. The length of each beam varies according to your measurements patio. Each beam must connect two 2 4s along the top to form a square. Use a drill and screws to install reinforcements around every corner at an angle of 45 degrees. This completes the external structure of the shadow of the build patio shade covers.