Grates Solar 3.5 inch metal concrete hollow blocks6 for 12 dual-powered outdoor lights with exhaust fan powered halogen bulbsSolar
Instructions to build a firewood shed :
1 Get a sealed chamber is large enough to contain the amount of wood that needs loosely stacked
2 Create vents around the bottom perimeter of the cutting box 6 by 12 rectangular holes and covering them with metal grills down. Have at least two on each side, or eight all together. Add more if they are spaced more than 3 feet away.
3 Cover the floor with concrete hollow block 3.5 inches high, spaced 2-4 inches apart to allow air circulation between them, but close enough to the woodpile a firewood shed .
4 Place at least two solar outside dual halogen flood lights inside the enclosure and at the bottom near the floor lamps.
5 Place an exhaust fan solar on the roof of the enclosure in accordance with the instructions for the fan.
6 Check the air flow to the fan and lights. There must be a constant draft entries lower air ceiling exhaust fan. After several hours of constant light of halogen bulbs of temperature in the enclosure should be slightly higher than the outside. A simple tips to build a firewood shed.