Garage cabinets – These instructions are based on furniture 36 inches (90 cm) wide, 36 inches high and 12 inches (30 cm) deep, but measures can be adjusted to other sizes. Most wall cabinets are 12 inches (30 cm) deep. These should be 11 1/4 inches by 36 inches (28.1 cm by 90 cm). The top and bottom sides will join out. These parts should be 11 1/4 inches by 34 1/2 inches (28.1 cm by 86.2 cm). The back will fit directly to the rear of the cabinet. Its size should be 36 inches by 36 inches (90 cm by 90 cm). The furniture should be constructed of a material 3/4 inch (1.8 cm) thick.
Cut the pieces of material using a circular saw. Label the edges of the pieces to avoid confusion during assembly. Gun garage cabinets to put the pieces of the sides below the top and bottom. Apply a small amount of glue joints. Adjusts the pieces using a drill with wood screws 1 1/2 inch (3.75 cm). Place the other side of the cabinet using the same material.
Place a small amount of adhesive around the garage cabinets where the rear section applies. Une this piece using a drill and wood screws 1 1/2 inch (3.75 cm). Place the hinges on the doors using a drill. Place in cabinet backs on a level surface. Align the doors on the cabinet and adjust the hinges using a drill.