The basic elements to build round swivel chair are simple. There are six main parts in a swivel chair. From then put all the pieces to make a complete chair will become a puzzle. Gather everything you need and if there is something that you have, you can buy at any hardware store. Grease the cylinder gas slightly and begins to assemble the kit bearing on the cylinder of gas. There will be about six washers and have to grease them before you can fasten to the cylinder of gas. Start with rubber pad and continues with washer 15/16 inches. Now place the bearing, which normally has five small balls. After placing bearing aplícale about enough grease. Now, put the other washer 15/16 inches in the cylinder of gas.
For round swivel chair, slide the cylinder of gas in the back of the chair together with the bearing kit previously attached to the cylinder of gas in step 1. Place the smallest at the bottom of the column of the saddle washers. Introduces the hook kit including bearing in the lower part of the chair column. Check to make sure everything is in place.