Rustic wood floating shelves – Nothing is as rustic as rough-hew wood. The natural edge of the wood and bark create a truly rustic atmosphere, whether used as a table, bench or rustic wood floating shelves. By built-in shelves timber is essentially the same process as do other types of shelves, though it should be noted that wood, instead of any support system supports hidden mode is ideal for maintaining the natural feel of the book stand.
To build rustic wood floating shelves are Measure 2 inches from the end of the wooden beam that you are using for your platform. It should be about 2 inches thick to accommodate the blind support shelf, 8 inches wide and 20 inches long to fit between two wall studs. Shelf brackets blind rods are 5 inches long to fit within the platform, while the back of the bracket is secured to the wall. Check points 2 inches at the rear edge of the platform and drill a 7/16 inch diameter at the rear of the platform which is about 5 1/4 inches deep.
Place the back of the platform rests on the holes. Trace the outline of the mounting plate on the rear edge of the platform. Locate two posts in the area to mount the platform using a stud finder. Mark a line between the positions of the stud to the desired height of the platform that is. Place the rustic wood floating shelves leans against the wall, one on each bolt point level line. Place the platform on the rods of the shelf supports and push the shelf to the wall.