Measure the inside of the grey grey crib, each part separately. Cut four pieces of wadding according to the measurements. Place the fabric (with the wrong side up) and place pieces of wadding from edge to edge. Hitch Pin the fabric for snug around the batting. Be careful not to make it too tight. Remove the batting. Sew the fabric around the portion of the pins, leaving a generous fold. Turn the fabric inside out. Fill fabric with batting. Place the bumper in the cradle to check the size. Make a seam between each piece of wadding where you placed the pins.
With the bumpers in the grey grey crib,
determines the amount of excess fabric when you have the two ends together. Fold down the edges of the fabric edges and plánchalos. Place two lengths of tape at each end, and uses pins to hook them.
Place the bumper in the cradle and engages the bumper where the tapes further be more appropriate. Cut as many tapes as long’ve decided. The strips should be long enough to be folded in half, wrap the bars of the grey grey crib and tie them in a knot. Tape sewn within the upper bumper.Tags: gray and white crib bumper, gray crib bumper, grey baby bumper, grey crib bumper